Surgical scrub sink

The sink must be constructed from high-quality SUS304 or SUS316L stainless steel with a thickness of at least 1.2mm to 1.5mm. This ensures corrosion resistance, durability against harsh medical disinfectants, and a non-porous surface that prevents bacterial growth. The finish should be brushed or satin to reduce glare in the operating theater.

To maintain a sterile field, the sink must feature contactless operation, such as infrared sensors, knee-operated valves, or foot pedals. Additionally, the design should incorporate internal rounded corners (R-angles) to eliminate dirt traps and a sloped basin floor to ensure rapid drainage and prevent stagnant water accumulation.

Professional scrub sinks should include thermostatic mixing valves to maintain a constant water temperature (typically 35-40°C) and prevent scalding. For high-level sterilization, look for units equipped with UV water sterilization modules and 0.2-micron medical water filters to ensure the water used for scrubbing is free of pathogens.

Verify that the manufacturer complies with ISO 13485 (Medical Devices Quality Management). Depending on the target market, the product should have CE marking for Europe or FDA registration for the US. Ensure the electrical components (for sensor models) meet IPX5 or higher waterproofing standards to prevent electrical failure in wet environments.

Prioritize 'Audited Suppliers' who have undergone third-party onsite inspections by SGS or TÜV Rheinland. Request their Business License and Medical Device Production License. Check their export history to see if they have experience shipping to countries with strict medical regulations.

The primary risk is structural deformation or scratching during transit. Insist on reinforced wooden crate packaging with internal foam padding and moisture-proof film. For sea freight, ensure the use of desiccants to prevent 'container rain' from causing surface oxidation on the stainless steel.

Use Secured Trading Services offered by Made-in-China.com to ensure payment is only released after the goods have been shipped. For large bulk orders, a standard 30% deposit and 70% balance against the Bill of Lading (B/L) is common, but always conduct a pre-shipment inspection (PSI) to verify quality before final payment.

Surgical sinks may be classified under HS Code 732410 (Stainless steel sinks). Check for anti-dumping duties in your specific country regarding Chinese stainless steel. Ensure the supplier provides a Certificate of Origin (CO) to potentially benefit from preferential tariff rates under Free Trade Agreements.