Dual band omni antenna
5000+ products and 2000+ suppliers results
Industrial Grade Dual-Band Base Station Pipe Antenna UHF Omni Antenna
2.4GHz-5.8GHz Dual Band Outdoor WiFi Omni Fiberglass Antenna with N Male Connector
2.4/5.8GHz Dual-Band 7dBi High Gain Omni Directional Outdoor Fiberglass Antenna
Dual Band High Gain 5dBi 4G LTE Outdoor Omni Directional Terminal Antenna
Dual Band 6dBi Outdoor Omni Antenna for Enhanced Signal
Lora Dual Band Communication Omni Waterproof Base Station Outdoor Fiberglass Antenna
Dual-Band GPS GSM WiFi Omni Antenna for Indoor Outdoor Use
High-Performance Dual Band Omni Fibreglass Antenna for 4G 5g
Omni VHF UHF Fiberglass Antenna X520 X510 X510m 144/430MHz Dual Band Fixed Base Station Antenna
SD Diamond X510M Three Section 144/430MHz Dual Band Vhf Uhf Omni Fiberglass Base Station Antenna
Diamond Fixed Antenna 1700mm 144/430MHz VHF/UHF Omni Dual Band Base Station Fiberglass Antenna
4G LTE 800-2700MHz Indoor Ceiling RF Dual Band 5dBi MIMO Omni Antenna
Customize 698-2700MHz Dual Band 360 Coverage Omni Fiber Glass Cylinder Antenna
Dual Band 2.4GHz 5.8GHz 2.5dBi 3dBi Internal Omni Built-in PCB Antenna
High-Performance Dual Band N Female Omni Ceiling Antenna
Factory Manufacturer Fpv Drone Antenna Omni Directional High Gain WiFi Dual-Band 2.4G 5.8g Fpv Antenna
Sourcing guidance for Dual Band Omni Antenna
How to choose the right Dual Band Omni Antenna for commercial or industrial use?
Selecting a high-performance antenna requires balancing gain (dBi), frequency coverage, and environmental durability. For B2B buyers, it is essential to ensure the antenna supports both 2.4GHz and 5.8GHz bands simultaneously to accommodate modern Wi-Fi 6 or IoT standards. Prioritize antennas with low VSWR (Voltage Standing Wave Ratio) ≤ 1.5 to minimize signal loss and maximize transmission efficiency. For outdoor deployments, look for IP67-rated waterproof housing and UV-resistant materials like fiberglass or high-grade ABS to prevent degradation over time.
What are the key technical specifications and compliance standards for these antennas?
Buyers must verify that products meet CE, FCC, and RoHS certifications to ensure legal entry into international markets. Key technical benchmarks include impedance (usually 50 Ohms), polarization (typically vertical), and connector types (N-Type, SMA, or RP-SMA). For high-density environments, check the horizontal beamwidth (360°) and vertical beamwidth to ensure uniform coverage. If the antenna is for telecommunications, ensure it complies with IEEE 802.11a/b/g/n/ac/ax standards.
How can I evaluate the quality and performance of a supplier's antenna samples?
Request a Network Analyzer test report from the supplier to verify the actual gain and frequency response. Conduct a salt spray test if the antennas will be used in coastal or humid areas to check for corrosion resistance on the connectors. It is also recommended to perform a field signal strength test comparing the sample against existing hardware to validate the real-world coverage radius and throughput stability under load.
What are the typical usage scenarios for Dual Band Omni Antennas?
These antennas are versatile and widely used in Smart City infrastructure, industrial IoT gateways, public Wi-Fi hotspots, and warehouse automation systems. They are ideal for providing 360-degree signal coverage in open areas where the location of end-user devices is unpredictable. In maritime or logistics settings, they are often mounted on vessels or AGVs (Automated Guided Vehicles) to maintain constant connectivity while in motion.
Cross-Border Purchasing Considerations for Dual Band Omni Antennas
What are the common risks when sourcing antennas from overseas suppliers?
The primary risks include gain inflation (where suppliers claim higher dBi than the physical hardware can provide) and material substitution (using low-grade copper or plastic). To mitigate this, use Made-in-China.com's 'Audited Supplier' reports to verify the manufacturer's production capacity and R&D strength. Always insist on a pre-shipment inspection (PSI) to ensure the batch matches the approved sample.
How should I negotiate pricing and MOQs for bulk antenna orders?
Antenna manufacturing is highly scalable; therefore, you should negotiate tiered pricing where the unit cost drops significantly at 500, 1,000, and 5,000 units. Ask for OEM/ODM customization (such as custom cable lengths or branded enclosures) to be included in the bulk price. For long-term partnerships, negotiate a 2-5% spare parts allowance to cover potential shipping damage or minor defects.
What are the best practices for shipping and logistics to ensure product safety?
Antennas, especially long fiberglass models, are prone to bending or snapping. Ensure the supplier uses reinforced cardboard tubes or honeycomb crates for shipping. For international trade, clarify the Incoterms (FOB or CIF); FOB is generally preferred for larger volumes to maintain control over freight costs. Ensure all shipments include a detailed packing list and Certificate of Origin to expedite customs clearance.
How can I ensure transaction security and payment protection?
Utilize secure payment escrow services provided by platforms like Made-in-China.com to ensure funds are only released after you confirm receipt of goods. Avoid direct wire transfers to unknown accounts. For large-scale enterprise procurement, consider using a Letter of Credit (L/C) to provide a bank-guaranteed layer of security for both parties.





























